|The Model 390 and 480e Screenphone
has three softkeys on either side of the screen. As up to nine keys can be
programmed (using the “More” softkey to access the additional key
positions) two programming screens are provided.
Use Tab to jump between fields. Do not
press enter until you are ready to submit the form. The fields on the
outside of the screen area are for entering the * codes or phone numbers
the soft key will dial when pressed. Allowable characters are
1,2,3,4,5,6,7,8,9,0,#,*, F(=Flash), W(=Wait for 3 seconds or dial tone,
whichever comes first), H(=Hang-up) and ,(Comma=Wait 1 second).
Note: When using the , (Comma) function,
please note that one comma equals two character spaces.
Here is an example of how you would
program the screenphone for one touch access to your voice mail. Assume
the telephone company access code is *98 and your voice mail password is
1234567. In the button Phone #/Access Code box, you would type in
*98www1234567. Using the “w” (wait for 3 seconds) character allows time
for the access code to connect to your voicemail. You could type “vmail”
in the button text to label the softkey on the screen.